Terex TA30 2002 Parts Catalog

I’ve seen too many guys try to order parts for a Terex TA30 from a faded decal or a generic cross-reference list. That’s how you end up with a brake caliper that doesn’t match your serial number. This Terex TA30 2002 Parts Catalog is the genuine Terex publication — the same one the dealer’s parts counter uses. It covers serial numbers A8281011 through A8281698, and it’s 484 pages of factory part numbers. No third-party summaries. No photocopies.

Part number 15500253. June 2002, revised November 2006.

Terex TA30 2002 Parts Catalog: Factory Parts for Your Articulated Truck

The part number on the cover is 15500253. Publication date June 2002, revised November 2006. That revision matters — parts numbers get updated. If you’re working on a TA30 from that serial band, this is the book. It’s specifically for the Cummins QSM11-350 engine and ZF 6WG-310 transmission. Every part in this book is keyed to that setup.

484 Pages of Factory Part Numbers

Open to any page and you see exploded diagrams next to a list of part numbers. Page 1 has the serial number range and publication info. That’s where you start. If your machine is outside A8281011 to A8281698, you need a different catalog. Don’t try to fudge it.

What Does the Manual Cover?

The Table of Contents on page 5 shows the Major Sections. Section 100 is Chassis — frame rails, brackets, mounts. Section 140 is Front Axle Group — spindles, bearings, steering links. Section 230 is Body Hoist System — rams, control valves, pivot pins. There are more sections for engine, transmission, electrical — but the TOC is your road map. Page 5 lays it out. If you try to use a generic parts list, you’ll end up with the wrong u-joint or a seal that doesn’t fit. The TA30 articulated truck has unique part numbers for the articulation hitch, the rear axle housing, and the cab mounts. This manual includes every nut and bolt specific to the serial range. That’s the difference between a truck that stays running and one that sits in the yard waiting for the right part. Automotive Industry Overview

Section 140: Front Axle Group – Where to Find Those Hard-to-Get Parts

The front axle on these trucks takes a beating. The Parts Catalog lists every bolt, bushing, and seal by factory number. You need a new kingpin bushing? It’s in Section 140. Check the serial number for your axle. TEREX TA30 Service Manual will give you the removal procedure, but this Parts Catalog gives you the number. Pro tip: always verify the part number against your machine’s build date. The 2002 revision added updates for the ZF transmission.

3 Major Sections You Need to Know

If you’re new to the TA30, focus on these three: Chassis (100), Front Axle (140), and Body Hoist (230). Those are the sections you’ll visit most for wear parts. The Chassis section includes the articulation hitch and steering cylinders. The Body Hoist section covers the hydraulic system. TEREX TA25 TA27 TA30 TA35 TA40 Glass Parts Catalog is a different publication — this one is the full machine parts book.

Check the Table of Contents First

Too many guys flip through randomly. Take the 30 seconds to find your section on page 5. The index codes at the top left of each page — three numbers — tell you exactly where you are. Major section, sub-section, and PLI number. That’s the factory’s system. Use it. Terex TA30 1999 Parts Catalog is an earlier edition; this 2002 version has the latest revisions.

Frequently Asked Questions

What is the serial number range covered?

A8281011 through A8281698. Check page 1.

How many pages does this Parts Catalog have?

484 pages of genuine Terex factory part numbers. Each page is a direct scan from the original publication. No watermarks, no missing pages.

Is this a reprint or an original Terex publication?

This is an original Terex Parts Catalog, not a reprint or aftermarket compilation. The PDF is a direct scan of the factory-issued book with part number 15500253, published June 2002 and revised November 2006. It includes the full warranty statement from Terex Equipment Limited on page 3. Aftermarket catalogs often omit the revision history or combine parts from multiple machines. This manual is specific to the TA30 with serial numbers A8281011 through A8281698, powered by Cummins QSM11-350 and ZF 6WG-310 transmission. Any deviation in serial number or engine spec means the part numbers may not match. That’s why OEM documentation matters.

Does this manual include repair procedures?

No. This is a Parts Catalog, not a service manual. It lists part numbers and exploded views. For torque specs and removal instructions, get the TEREX TA30 Service Manual.

Whether you’re rebuilding a TA30 or just need a single pin, having the factory part numbers saves you the runaround. Automotive Industry Overview Download the Factory Manual and stop guessing.