Terex PT-60 2010 Parts Catalog – What You Get When You Stop Guessing

If you’ve ever ordered a part for a Terex PT-60 from a third‑party list and ended up with the wrong seal, wrong filter, or something that doesn’t bolt up, you already know the pain. That’s why this Parts Catalog from 2010 exists – 26 pages of factory‑sourced part numbers, assembly references, and lubricant specs that Terex themselves printed. I’ve been turning wrenches for 28 years, and I’ll take an OEM parts book over any aftermarket cross‑reference every time.

21 Assemblies, One Serial Number Range

This catalog covers PT‑60 machines with serial # TTE 02612–Current (as of the print date). You get exploded‑view breakdowns for every major group – from the Cab (R.O.P.S.) Assembly (Section 1) all the way through the Track Installation Tool (Section 21). Each section lists OEM part numbers with the required 380 prefix so you order the exact piece the plant intended.

Need a radiator/oil cooler? Section 6. Hydraulic control block? Section 8. Lift arm tubes and fittings? Section 16. The organization is dead‑simple: find the assembly, look up the number, add the prefix. No hunting through vague drawings.

Lubricants and Service Items – No Guessing Grades

Page 3 of the manual lists the General Service Items & Lubricants. It gives manufacturer and part number for engine oil filter (Perkins), primary air filter (Donaldson P822768), secondary air filter (Donaldson P822769), fuel filter, water separator O‑ring, fan belts, A/C belt, antifreeze (ethylene glycol long life), engine oil 10W‑30, and multi‑purpose lithium grease. You get the exact tube count per case too – that matters when you’re stock ordering.

If you’re working on a PT‑60 that’s been sitting, the hydraulic service items and cylinder service items are listed right after the TOC. That section alone saves a call to the dealer.

Aftermarket Parts Lists? Throw Them Out

I’ve seen guys dig up “equivalent” part numbers from generic sites and end up with the wrong thread pitch on a hydraulic fitting. This catalog is an original OEM print – not a reprint, not a scan with missing pages. The part numbers tie directly to Terex’s own inventory system. When you see “P/N 4030-122 RH Side Panel” under Interior Panels, you know that’s the factory panel, not a substitute that needs trimming.

For deeper diagnostics, pair this with the TEREX PT-50 PT-60 Service Manual for torque values and repair sequences. If you’re working on a 2009 model, the TEREX PT-50 PT-60 2009 Service Manual covers earlier production changes. And obviously, the Terex PT-60 2010 Parts Catalog – OEM Factory Parts Manual is what you’re looking at right now.

Who Needs This Catalog?

If you’re a shop owner stocking parts for a fleet of compact track loaders, you need this on the bench. Home‑garage guys who bought a used PT‑60 will save hours of cross‑referencing. Even if you’re just refreshing the hydraulic quick attach (Section 18 – optional assembly), having the factory drawing means you order the correct seal kit the first time. I’ve seen too many machines down because someone ordered a generic O‑ring that didn’t handle the pressure rating.

3 Reasons OEM Documentation Wins

• Part numbers are verified against production – no translation errors from aftermarket publishers.
• Exploded views show exact orientation of hoses, brackets, and fasteners – you won’t misroute a line.
• Lubricant specs come directly from the engine and hydraulic manufacturers, so you avoid warranty issues.

For a broader look at how construction equipment manuals fit into the Automotive Industry Overview, the same principles of traceability apply. And if you want to understand why OEM data matters in heavy equipment, the Automotive Industry Overview gives background on standardization.

FAQ – Common Questions About the PT‑60 Parts Catalog

Does the catalog include torque specifications for assembly?

No. This is a parts catalog, not a service manual. Torque values are in the separate service manual [LINK_ID_REL_0]. You’ll get part numbers and exploded views here.

Can I use this to identify a serial number break point?

Yes. All sections reference Serial # TTE 02612‑Current. If your machine is older than that, you need the earlier revision. Contact support if you’re unsure.

Are the page numbers exact for each section?

Each section starts with its own page (e.g., Section 1 begins on page 1‑A). The total document is 26 pages. Lube specs start on page 3.

Will this help me rebuild the hydraulic control assembly?

It gives you the part numbers for every component inside the control block (Section 8). For removal and installation steps, get the service manual.

Stop wasting time on generic part lookups. Download the Factory Manual for your Terex PT‑60 and start ordering with confidence that part numbers match the machine on your lift.