Broderson IC-200-2G, IC-200-3G 2008 Operators Manual – Factory OEM Specs

You've got a Broderson IC-200-2G or IC-200-3G on the lot and the OEM manual disappeared years ago. I've seen guys guess on outrigger pressures and bend a boom cylinder holding valve. Don't be that guy. The Broderson IC-200-2G, IC-200-3G 2008 Operators Manual is the original factory print from Broderson Manufacturing Corp. 70 pages of the procedures they used to build the machine. No third-party rewrites.

Description and Specifications – Dimensions That Matter

Section 1 lays out the IC-200-2G dimensions (page 1-2) and IC-200-3G dimensions (page 1-3), plus turning dimensions. If you're fitting this crane into tight jobsites, those numbers are your clearance bible. The manual also lists the Cummings QB3.3-C99 engine specs – that's the powertrain you're working with. All measurements are in inches and pounds, as the factory designed it.

Operation Section – Safety Rules and Crane Conditions

Section 2 starts with Safety Rules – not generic OSHA boilerplate but specific Broderson conditions for crane operation, lifting, and travel. Page 2-1 covers crane conditions you must verify before picking any load. I've seen too many operators skip the outrigger check valve test (page 2-17) and end up with a tipped rig. The manual spells out the anti-two-block system – that's the wire rope cutout that keeps your boom from running into itself.

Instruments and Controls – Four-Wheel Steer Operation

Four-wheel steer on a crane is not a party trick. The manual dedicates page 2-6 to explaining the control functions for steer modes. You get the OEM sequence for driving the vehicle and operating the crane. Normal gauge readings are listed on page 2-8 – if your hydraulic pressure isn't in that window, you've got a problem you need to fix before lifting anything. The travel drive uses a Manual Transmission – understanding gear ratios helps diagnose driveline issues.

Rated Capacity Limiter and Crane Capacity Charts

The Rated Capacity Limiter (RCL) is your safety net. The manual covers how it works on page 2-9. Then the capacity charts for IC-200-2G (page 2-12) and IC-200-3G (page 2-13) give you the load limits at every boom angle and extension. A capacity example on page 2-14 shows you how to read the chart. Do not lift without confirming your load is under these numbers.

Safety Devices – Outrigger Check Valve and Holding Valves

Page 2-17 lists three critical safety devices: outrigger check valve, boom cylinder holding valve, and telescope cylinder holding valve. These are not optional. If any of those valves leak, the machine can settle or drop a load. The manual gives the factory test procedure – no guessing. If you need older Broderson manuals, check the Broderson IC-80-1D 1987 Operators Manual – OEM Specs for earlier models.

Optional Equipment – Boom Extension and Front Auxiliary Winch

If your rig has the boom extension, the manual tells you how to install (page 2-18) and stow (page 2-19) it. Capacity example for boom extension on page 2-20. Front auxiliary winch on page 2-21. All OEM procedures. For the IC-200-1B and 2B, see Broderson IC-200-1B & 2B Operation & Maintenance Manual. If you also work on excavators, the Hitachi ZAXIS225US-3 2007 Operators Manual | OEM Factory Specs covers a different machine but same level of detail.

Source Authenticity – Factory Original, Not a Copy

This is a direct copy of the OEM manual. Not a photocopy of a photocopy. Not a scanned third-party reprint with blurry torque specs. Broderson Manufacturing's own print, part number 990-30113, copyrighted 2008. You get the factory warranty statement and the original format. Refer to the Manual Transmission section of the OEM manual for shift patterns – the information is only reliable from the source.

FAQ

Does this manual cover the IC-200-2G and IC-200-3G?

Yes. Both models are included with their own capacity charts and dimensions. One manual covers both.

Are torque specs included for the boom cylinder holding valve?

The manual does not list bolt torque values for that valve. It covers test procedures only. For torque specs you need the service manual.

I have a 2009 model – will this 2008 manual work?

It depends on the serial number. The manual covers 2008 production. Broderson may have made updates. Check your serial number against the warranty page. If in doubt, confirm with Broderson Manufacturing Corp.

Can I use this manual to train new operators?

Yes. The safety rules and sequence of operation sections are written for the operator. Go through Section 2 with them before they touch the controls. The capacity chart reading exercise on page 2-14 is a good test. Also review the anti-two-block system on page 2-17. If they miss that, they could damage the boom. The manual gives clear step-by-step procedures – use it as your training textbook. Don't let anyone run the machine without understanding the four-wheel steer operation from page 2-6. That's how people get pinned against walls.

If you're running a Broderson IC-200-2G or IC-200-3G, you need the factory procedures to keep it safe and legal. Don't rely on memory or a faded photocopy. Download the Factory Manual now and put it in the cab.