Cub Cadet 1204 Parts Catalog – Factory OEM Parts Breakdown

If you’ve ever stared at a greasy pile of parts wondering which nut goes where, you know the value of a factory parts catalog. The aftermarket nonsense with blurry diagrams and wrong part numbers is worse than no manual at all. This Cub Cadet 1204 Parts Catalog is an OEM print – 80 pages of exact part numbers, exploded views, and hardware specs. No interpretation required. It covers serial numbers 756,300 through 799,999 and includes every section from the air intake to the brakes. I’ve been turning wrenches for 28 years, and I’ll tell you straight: if you’re rebuilding a Cub Cadet 1204 without this book, you’re wasting time and money.

Air Intake Assembly: What the Parts Catalog Shows

Page 1 of the catalog kicks off with the air intake system. You get a full exploded diagram with reference numbers, then a table listing each part – wing nut, cover, seal, element, screws, base, tube, gasket, spacer, and decal. Each entry includes the genuine Kohler part number (like KH-47-082-01 for the cover) and a column marked S/P/F to tell you if it’s a service part, primary, or functional. That column saves you from ordering a part that only comes in a kit. For example, the tube (KH-47-134-02) is marked /P – primary. The element (KH-47-083-01) is marked S – service. Straightforward once you know the code.

7 Systems Covered in This Catalog

This 80-page document breaks down the entire tractor into individual assemblies. Based on the original file, you’ll find sections for air intake, baffles and shroud, brakes and connections, plus additional systems like the electrical harness, steering, transmission, and PTO. Each section has its own exploded diagram and parts list. The baffles and shroud section on page 3, for instance, lists the head baffle, cylinder baffle, blower housing, duct bracket, and duct kit – with six different screw and washer part numbers. Need a #10-32 x 7/16 screw? That’s ref 11, part KH-X-67-64. No guessing, no measuring.

Does This Manual Cover the Brakes System?

Yes. Page 5 shows the brakes and connections layout. The diagram includes 14 reference points – everything from the brake pedal linkage to the actuating arms and return springs. Each part has a specific part number. This is critical when you’re rebuilding a brake system because a wrong spring tension or missing washer can cause a failure. The catalog doesn’t include torque specs or service procedures – that’s what the service manual is for – but for ordering the right brake parts, this is the only source you should trust.

Get the Right Part Numbers with Factory Diagrams

Every page in this catalog is a direct scan of the Cub Cadet factory print. You’re not looking at a redrawn aftermarket version where someone swapped a bolt size. The part numbers are the same ones a dealer uses. For instance, the air cleaner cover on page 2 lists part KH-47-082-01. If you walk into a Cub Cadet dealer and give them that number, they’ll hand you the correct cover. Compare that to a generic catalog that says “air cleaner cover – fits many models” – you’ll end up with a part that almost fits. Almost doesn’t cut it on a running engine.

Source Validity: OEM vs Aftermarket Documentation

Aftermarket parts catalogs are a gamble. I’ve seen them list a part number that was superseded ten years ago or omit a critical washer. This Cub Cadet 1204 Parts Catalog comes from the original factory PDF – CubCadet_1204_Parts_Catalog_en-21214001600.pdf – and includes the dealer phone number printed right on the page (606-678-9623). That tells you it’s a genuine reference used by dealerships. When you pair this with the service manual, you have the complete picture for a full restoration or repair. For related models, check out the Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs for a slightly different chassis, or the Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns if you’re working on a larger machine. The Cub Cadet 81, 21121C290248 Parts Catalog – OEM Factory Breakdown covers a different series. For broader context on small-engine equipment, the Automotive Industry Overview is useful, but this catalog gives you the parts you actually need. Automotive Industry Overview

FAQ

What serial numbers does this parts catalog cover?

Serial numbers 756,300 through 799,999.

How do I use the exploded diagrams to order parts?

Each exploded view shows the assembly with reference numbers that correspond to a table listing part number, description, quantity, and whether it’s a service (S), primary (P), or functional (F) part. For example, page 2 of the air intake section lists the cover (KH-47-082-01) and element (KH-47-083-01) with separate part numbers. Use the reference number on the diagram to find the row in the table. Then order from a dealer using the factory part number. The catalog also indicates which parts are included in kits – like the duct kit on page 4 that bundles ref 4 and 11. This level of detail prevents ordering a wrong bracket that won’t fit.

Stop wasting time flipping through generic parts books that leave out half the hardware. This OEM catalog has 80 pages of factory-correct part numbers and exploded views for the Cub Cadet 1204. Download the Factory Manual now and get the exact parts your tractor needs.