GEHL 193, 223 Parts Catalog – Factory Parts Breakdown
If you’re ordering parts for a GEHL 193 or 223 compact excavator and don’t have the factory part numbers, you’re burning shop time and risking wrong parts. I’ve seen guys order a track roller three times because they guessed the suffix. A GEHL 193, 223 Parts Catalog eliminates that. This is the same 118-page binder that dealers use—issued under form number 909827. No aftermarket reprints, no third-party guesses. Every bolt, seal, and hose is called out with the exact GEHL part number and fastener description. You need the right cap screw grade? It’s on the inside back cover. Want the metric torque conversion? Multiply Newton-meters by 0.738 to get foot-pounds. That’s printed on page 2.
What This Parts Catalog Actually Covers
Opens with an introduction that tells you how to read the exploded views and fastener abbreviations. Then it jumps straight into Decal Locations (pages 2–7), Undercarriage for both the 193 and 223 (pages 8–9), Track Tensioner (page 10), Tension Wheel (page 11), Track Roller (page 12), Dozer Blade assemblies (pages 13–16), Chassis and Covers (pages 17–18), Lubrication (page 19), Counterweight (page 20), Engine Cover (page 21), Seat Console & Sidewall (page 22), Isolation Mats (page 23), Lifting Boom (page 24), and the Short Dipper Arm (page 25). Each section uses reference numbers that tie to an illustration and a parts list. If a cap screw is Grade 5, zinc plated, it says so. If it’s a flat head cap screw, the abbreviation FHCS tells you. The manual does not leave you guessing.
Torque Specs and Fastener Abbreviations
Standard attaching hardware torque values are provided on the inside back cover. Metric torque values shown in the illustrations are in Newton-meters, but you can convert to foot-pounds by multiplying by 0.738. For example, 100 N·m equals about 74 ft·lbs. The abbreviation table on page 2 covers CS (cap screw), HN (hex nut), LN (lock nut), LT (left hand thread), RT (right hand), and more. Unless otherwise noted, all cap screws are Grade 5, cadmium or zinc plated. Hex nuts for Grade 5 fasteners are Grade B. That matters when you’re replacing a bolt that holds the dozer blade or lifting boom. Aftermarket manuals skip this level of detail.
Who Needs This Manual?
Any shop that works on GEHL compact excavators from the 193 to 223 series. If you’re a DIY owner running a 223 on your property, this catalog lets you order the exact track roller or hydraulic fitting without pulling the part and measuring it. For professional mechanics, it cuts down parts-ordering errors that eat your flat-rate time. If you’re maintaining a fleet, you need the serial number and model number off the tag on the front cabin panel—manual tells you where to find it. Pair this with the GEHL 153, 193, 223 2009 Operators Manual – Factory Specs for service procedures, and you have a complete factory setup.
3 Reasons to Order the Factory Manual
First, genuine part numbers. Every reference number in the exploded view ties to a GEHL part number. You order what the factory shipped. Second, fastener specs. You get the bolt grade, thread, plating, and torque. No guessing whether a bolt is Grade 5 or Grade 8. Third, the book respects left and right from the operator’s seat facing forward—no confusion on orientation. That keeps you from ordering a mirror-image part.
OEM Documentation vs. Aftermarket Copies
This manual is printed by GEHL. The form number is 909827. It says “GEHL® Company reserves the right to make changes or improvements… without incurring the obligation to install such changes on any previously delivered units.” That’s legalese for “this is the real deal.” Aftermarket parts catalogs often reindex fasteners or omit the grade. I’ve seen third-party lists substitute a metric bolt where a Grade 5 should be. Don’t take that risk on a 5,000-pound excavator. If you want to understand the diesel engine that powers these machines, read this Wikipedia article on diesel engines. But for part numbers, stick to the OEM source.
Related Manuals
Frequently Asked Questions
- Does this parts catalog include service procedures like engine overhaul?
- No. This is strictly a parts catalog with exploded view illustrations and part numbers. It does not contain removal, installation, or repair steps. For that you need the service manual.
- Will this manual work for the GEHL 153 model?
- It covers the 193 and 223 only. Some undercarriage components may overlap, but the part numbers are specific. Check the Gehl 223 2009 Parts Catalog for cross-reference.
- How do I read the reference numbers in the illustrations?
- Each part has a reference number on the drawing. That number appears in the parts list next to the GEHL part number. Additional info after the reference number indicates special notes.
- Fastener torque values? Torque values for cap screws are on the inside back cover. Metric values are in Newton-meters; multiply by 0.738 for foot-pounds.
- Fastener torque values for cap screws are on the inside back cover. Metric values are in Newton-meters; multiply by 0.738 for foot-pounds. Grade 5 bolts require specific torque ranges—do not substitute generic values.
Stop ordering the wrong track roller or guessing bolt grades. Get the factory document that parts counter guys use. Download the Factory Manual now and keep it on your tablet or print it for the shop binder. Every page of the 118-page original is scanned and ready.
Reviews
There are no reviews yet.