If you’re ordering parts for a Dynapac CC422 and don’t have the factory parts catalog in your hand, you’re wasting time. I’ve seen too many guys slap on a ‘cross-reference’ part and then have to tear it back out because the bolt pattern was off or the hydraulic fitting thread was different. This Dynapac CC422 Parts Catalog is the only way to get the exact OEM part numbers, exploded diagrams, and serial number breaks for your machine. Not a scanned copy of a copy — an original factory publication from Dynapac’s own print run. 347 pages, paper, direct from the manufacturer.
Dynapac CC422 Parts Catalog: 347 Pages of Factory Exploded Views
The catalog is organized by assembly groups. Every major component is shown in an exploded view with callouts. Part numbers are indexed. You get the exact dimensions for hoses and seals. The serial number break tells you which revision applies to your machine. That’s the difference between getting the right part and ordering blind.
Ordering Procedure: The Six Required Details
On page 4, Dynapac lists the six pieces of information you need to give when ordering a spare part. Type of machine, roller serial number, quantity, part number, part denomination, and dimensions for items sold by length. If you leave out the serial number, you’ll likely get the wrong part because Dynapac updated components over the production run. I’ve seen dealerships hold up an order for a week because the customer didn’t provide the serial number. This catalog tells you exactly which part number to use for your serial number range.
That’s the kind of detail that saves a Saturday.
Does This Catalog Cover Your Engine Serial Number?
The catalog specifically lists the engine as CUMMINS 4BTA 3.9 Elite, with serial numbers from *62510424* to *62510800*. If your CC422 has an engine outside that range, this edition (SCC422-1EN3, dated 2004-12) may not be the correct one. Earlier editions superseded each other. Check the table on page 3 to see which catalogue issue applies to your roller’s serial number. Ordering the wrong edition means you’ll be chasing parts that don’t match.
7 Major Assemblies Indexed in the Parts Catalog
Inside, the catalog breaks the CC422 into groups. Engine group (mounts, cooling, fuel system), Hydraulic system (pumps, valves, hoses, fittings), Drive train (axles, transmission, drive motors), Vibration system (eccentric weights, bearings, seals), Steering (cylinder, control valve, linkage), Electrical (wiring harness, switches, lights), Frame and body (engine hood, ROPS, fenders). Each group has its own table of contents. You flip to the page, find the exploded view, and order the part.
Source Authenticity: OEM Dynapac Print, Not a Copy
This is not a reprint from some third-party that scanned a library copy. This is the original Dynapac publication. The images are crisp, the part numbers are legible, and the serial number breaks are accurate. I’ve seen aftermarket manuals where the part numbers were retyped and had transposed digits. That gets expensive. You pay once for the real thing, or you pay twice for the wrong part.
If you need the workshop manual for tear-down and reassembly, the Dynapac CC222/422/522 Workshop Manual covers the same machine family. For a broader range of Dynapac rollers, see the Dynapac CC222 CC232 CC422 CC522 CA602 Workshop Manual.
The construction equipment industry, as noted in the Automotive Industry Overview, relies on proper documentation. The Automotive Industry Overview gives context on why OEM specs matter.
Frequently Asked Questions
- What years does this parts catalog cover?
- This edition (SCC422-1EN3) is valid from 2004-12, but check the serial number range on page 3.
- How do I order the correct part from this catalog?
- Start with page 4. You need the machine type, roller serial number, quantity, part number (from the exploded view), part denomination, and dimensions if the part is sold by length. The serial number is critical because Dynapac updates parts across the production run. Without it, you’ll likely get the wrong revision. The catalog tells you exactly which part number corresponds to your serial number. Follow the six steps and you’ll get the right piece the first time.
Don’t tie up a machine waiting for the wrong parts. Get the factory documentation that tells you exactly what to order and where it goes. Download the Factory Manual and have the correct part numbers in your hand before you call the dealer. That’s how you keep the roller running and your costs down.
Alex K. –
This is just what I required. The text is searchable and easy to navigate. Contains clear bolt torque specs for Dynapac. Highly recommended for mechanics.
Thomas B. –
Perfect factory service manual. It is easily zoomable on my laptop without blur. Every torque spec is provided for Dynapac CC422. Saved my weekend project! Thanks.
diy_master –
This is just what I was looking for. It is very easy to read on my tablet without blur. Every torque spec is provided for Dynapac CC422. Saves me hundreds of money.