Dynapac F2500C 2014 Parts Catalog
If you have ever watched a machine sit idle because somebody ordered the wrong scraper blade or a drive gear box that did not match the serial number, you know the cost of guessing. That is why I keep the factory Dynapac F2500C 2014 Parts Catalog within arm’s reach. This is not a generic aftermarket compilation. It is the original 567-page spare parts list released by Dynapac GmbH in 2014, covering F2500C pavers from serial number 0G000541 up to V5100TV serial 3100543. Every part number, every exploded view, and every group index comes straight from the Wardenburg, Germany factory floor.
I have seen too many shops try to save a few dollars on aftermarket parts lists only to discover the bolt pattern on a conveyor motor is off by a half-inch. That mistake costs you a full day of rework and a new motor. This catalog eliminates that gamble. You get the exact same part numbers that Dynapac uses in their own assembly line. Dynapac themselves will tell you: using unauthorized parts can void your warranty and shift liability onto you.
Gr.01 Main Frame and Steering Guide
Section Gr.01 breaks down the main frame into subassemblies: side arm guiding, splash guard, and steering guide. The steering guide part number 4812036083 is listed with its own exploded view. If you need to replace a bent steering guide on an F2500C, you flip to page 8 and order that exact number. No cross-referencing, no second-guessing.
Track Group: Left and Right Drive Gear Boxes
Under Gr.02 you will find both short track groups – left hand (4812027751) and right hand (4812027752). Each track group includes the drive gear box (4812035018) and the rubber plate wear kit (4812035550). The track cleaner assembly (4812028439) sits on page 18 with left and right scraper blades listed separately. If your paver is digging into the mat because a scraper is worn, you can order 4812030910 for the left side and 4812030911 for the right. That level of precision is what keeps a paver laying a clean mat.
7 Major Systems Cataloged
The TOC covers seven primary groups: main frame, track, push roller, conveyor, hopper, side screed arms, and drive (TIER 3). Each group splits into subassemblies with their own part numbers and diagrams. The conveyor group alone has four sub-sections – single-bar, double-bar, drive, and wear kits. Page 26 shows the conveyor turn assembly (4812026816). Page 27 gives you the conveyor motor (4812027439). You do not waste time flipping through unrelated sections.
Conveyor Wear Part Kits: What You Need
Wear part kits are listed explicitly. For example, the conveyor plate wear kit is 4812027441, and the conveyor chain wear kit for single-bar conveyors is 4812029178. If you are running a double-bar machine, you need the kit on page 4812027444. Ordering the wrong kit means your chain pitch does not match the sprockets. The catalog prevents that by tying each kit to its specific conveyor type.
Hydraulic System Breakdown (Gr.09)
Page after page of hydraulic assemblies – drive, auger, conveyor, tamper/vibration, fan, and work hydraulic. Each control block has its own part number. The directional spool valve for the auger is 4812008585. The hydraulic tank complete with return suction filter is 4812028192. You also get the hose package for screed 616/617 (4812036430) which splits into screed in/out and tamper/vibration hoses. When a hose bursts on a hot Texas afternoon, you need the correct replacement in your hand, not a generic hose that will fail again in a month.
Order Parts by OEM Number Only
This catalog is a spare parts list – it does not contain operating or safety instructions. You still need to follow the safety and operating instruction manual for service procedures. But for ordering parts, this is the only source you should trust. Every entry includes the original Dynapac part number, and the document warns that any damage from unauthorized parts is not covered under warranty or product liability. Do not rely on aftermarket cross-reference charts. Use the factory catalog.
Related manuals you might need: Dynapac F2500C 2014 Parts Catalog is the one you are looking at. If your machine is a newer model, check the Dynapac F2500C 2017 Parts Catalog. For a different paver line, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers those machines. Outside of construction equipment, the Automotive Industry Overview may interest you but does not replace a factory parts book.
Frequently Asked Questions
- Does this catalog include repair procedures or torque specs?
- No. This is a spare parts list only. Use it to order parts; do not try to rebuild a split gear box from the exploded view alone. You need the Dynapac safety and operating instructions for any repair work.
- How do I confirm my F2500C serial number is covered?
- Look at the first page of the catalog: serial range 0G000541 to V5100TV 3100543. If your machine falls inside that range, every part number in this catalog applies. If your serial is outside it, you may need a different edition. Check the cover page – it lists the exact serial range right under the model name.
Do not let a wrong part number kill your paving day. Download the Factory Manual and keep it on your tablet or printed out in the job trailer. One correct part order pays for the catalog ten times over.
Reviews
There are no reviews yet.