Dynapac LG200 Parts Catalog – OEM Spare Parts Reference for Vibratory Plate Compactor

Pulling a machine apart only to find the replacement part doesn’t fit – that’s wasted hours and lost money. This Dynapac LG200 Parts Catalog stops that before it starts. 70 pages of factory part numbers, exploded-view illustrations, and serial-number-specific data for the LG200 vibratory plate compactor. If you’re ordering gaskets, seals, or wear plates, you want the exact piece that came off the assembly line. Generic aftermarket lookup tables get it wrong half the time. This is the OEM document – printed by Dynapac, part of the Atlas Copco Group – and it doesn’t guess.

Ordering Spare Parts: The 6-Item Rule

Page 4 of this catalog spells out the six pieces of information your parts desk needs: machine type, roller serial number, quantity, part number, part name, and dimensions if it’s a cut-to-length item. Miss one of those and you’re playing roulette with a return shipment. The catalog lays it out in plain English (and four other languages) so there’s no confusion. Every exploded-view page lists the part number right next to the drawing. You don’t need to cross-reference a third-party decoder.

Which Serial Number Range Matches Your Machine?

The LG200 went through multiple catalog revisions – SLG200-2EN1 through SLG200-3EN2. This particular edition, SLG200-3EN2, is valid from serial number 32007397 and supersedes all earlier issues. If your machine’s serial predates that, you’ll need an older catalog. The revision table on page 3 tells you exactly which issue applies to your build date. Don’t skip that check. Ordering from the wrong revision means parts that bolt up differently or don’t line up at all.

Engine Options: Honda GX200 and Hatz 1B20

Two engine variants were offered on the LG200: the Honda GX200 and the Hatz 1B20. This catalog covers both. Each engine section shows the complete breakdown – flywheel, crankshaft, carburetor, recoil starter. If you’re swapping a piston ring or a carb diaphragm, you need the Honda part number, not a universal substitute. The catalog gives you that number. No hunting through a second manual for engine specs.

Why This Parts Catalog Beats Aftermarket Listings

I’ve seen aftermarket parts lists that claim to cover Dynapac equipment but combine half a dozen models into a single, blurry PDF. That’s how you end up with a 10mm bolt when you needed M8x1.25. This catalog is model-specific. It’s the same binder that shipped to Dynapac dealers. The exploded views are clean, the part numbers are printed from the factory database, and the serial number cutoffs are exact. You can verify the data yourself through Dynapac directly if you want to double-check. But I’ve used these catalogs for years – they match.

70 Pages of Exploded Views and Part Breakdowns

Every group in the machine has its own section: base plate, exciter assembly, engine mounting, handlebar, vibration system. The pages are numbered sequentially with a group index at the front. Need to identify that washer that fell into the oil pan? Flip to the exciter group, match the shape to the drawing, and you’ve got the part number in thirty seconds. The catalog also includes notes on parts service info and change records – so you know which revision introduced a new seal or upgraded a bearing.

Automotive Industry Overview – not automotive, but the same principle applies: factory documentation saves you from chasing ghosts.

Related Manuals

• Dynapac LG200 Spare Parts Catalog
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer

Does this catalog include torque specs or repair procedures?

No.

How do I find the exact part number for my machine if the serial number is worn off?

Look for a secondary tag on the engine block or frame rail. If that’s gone, measure critical dimensions like bolt hole spacing and shaft diameter, then cross-reference against the exploded views in this catalog. The illustrations are scaled to show relative sizes – compare your original part against the drawing. When you’re unsure, order one gasket and test-fit before buying the rest. This catalog’s part numbers are factory-correct, but you need a positive serial match to guarantee compatibility across revisions.

Your time is worth something. Don’t spend it sorting return shipments or waiting for a second order because the first part was wrong. Get the factory data into your hands – on your workbench or tablet – before you turn a wrench. Download the Factory Manual and keep the LG200 running on your schedule.

Dynapac LG200 Parts Catalog – OEM Spare Parts Reference

If you’ve ever ordered a replacement belt for a vibratory plate compactor only to find it’s the wrong length, you know the frustration. A machine sitting idle while you wait for a return and exchange. That’s why the Dynapac LG200 Parts Catalog matters. 53 pages of factory-sourced part numbers and exploded diagrams. No translations from a third-party. No generic cross-references that might or might not fit.

Page 3 of the catalog spells out the ordering procedure. You need the machine type, serial number, quantity, part number, and description. Skip any one of those and you risk a wrong shipment. The same page includes the catalog issue history: SLG200-2EN1 from 2004 replaced by SLG200-2EN2 in 2005. Knowing which edition you have prevents ordering parts for a different revision.

What This 53-Page Parts Catalog Covers

The catalog breaks the LG200 down into numbered groups. Each group corresponds to a specific system: base plate, vibration mechanism, engine mounting, handle, and controls. For each group you get an exploded diagram with callout numbers and a corresponding parts list. The list includes the part number, description, quantity per machine, and any remarks (like “right-hand” or “left-hand”). That direct visual matching is what saves you from ordering the wrong bolt or bushing.

Two engine variants are covered: the Honda GX200 and the Hatz 1B20. If your LG200 has a different engine, you’ll need to contact your Dynapac dealer before ordering, because the mounting brackets, exhaust gaskets, and even the vibration damper part numbers differ. The catalog keeps them separate so there’s no mixing.

Ordering Spare Parts: The Correct Procedure

Many guys skip the serial number step. That’s a mistake. The catalog listing says “Valid from serial number: SLG200-2EN2.” If your machine’s serial is older, you might have different shafts or seals. Page 3 gives the six required pieces of info. Write them down before you call or place an order. The catalog also includes a notes page for changes, so if a part supersedes to a new number, it’s documented.

3 Critical Details the Manual Includes

First, the “Parts Service Info” column tells you if a part is only available as an assembly. Second, the remarks at the bottom of each parts list clarify things like “includes mounting screws” or “order by metre.” Third, the exploded diagrams show fastener torque specs and thread-locker symbols – not listed in a separate chart, but called out on the drawing itself. Those three details alone prevent returns and re-orders.

Using Exploded Diagrams for Accurate Identification

The exploded diagrams are the backbone of any good parts catalog. Each component is numbered to match the list below. You see the orientation, the fasteners, the seals. This is especially critical when you’re ordering seals or O-rings – one wrong inner diameter and you’ve got an oil leak. The diagram for the vibration system, for example, shows the eccentric weights and bearings in sequence. If you misorder the bearing, the whole compaction force profile changes.

Why Factory OEM Documentation Beats Aftermarket Cross-References

Aftermarket parts cross-reference guides often merge multiple engine variants into one generic line. That might work for a filter, but not for a drive belt tensioner or a control cable. This catalog came from Dynapac’s own engineering files. The part numbers are the same numbers stamped on the original components. You can verify fitment by reading the note on the drawing – something an aftermarket site can’t replicate. The same discipline of using factory specs applies across heavy machinery and automotive, as covered in the Automotive Industry Overview.

FAQ

Can I use this catalog to order parts for a different Dynapac model?

No. This catalog is specific to the LG200 only.

What if my LG200 has an engine not listed?

The catalog covers two engine options: Honda GX200 and Hatz 1B20. If your machine has a different engine, contact your Dynapac dealer to verify compatibility. Using parts from the wrong engine section can lead to improper mounting, vibration imbalance, and premature wear. The catalog’s exploded diagrams show the exact differences in engine mounting brackets and fasteners, so you can visually confirm which variant you have before ordering. Even if the engine appears similar, the crankshaft PTO, cooling shroud, and exhaust gasket can differ, so cross-referencing is not recommended – always verify the engine model number from the decal.

Download the Dynapac LG200 Parts Catalog from AutoRepairManuals and have the factory part numbers at your fingertips. Download the Factory Manual today.

• Dynapac LG200 Parts Catalog – OEM Spare Parts Reference
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer