GEHL 1438, 1448 Parts Catalog – Factory OEM Manual for Power Box Pavers

I’ve been turning wrenches for 28 years, and I can tell you the difference between a job that goes smooth and one that turns into a nightmare often comes down to one thing: having the right part number and the correct torque spec. This GEHL 1438, 1448 Parts Catalog is the factory document that gives you both. It’s 132 pages of exploded views, part numbers, and hardware torque values that the dealer uses. If you’re rebuilding a Power Box paver and you’re tired of guessing which filter element goes where, this is what you need. The manual covers serial numbers 18100 and before, so check your machine’s plate before ordering.

Hardware Torque Specifications – Inside Back Cover

Torque values on the inside back cover. Use them. Standard attaching hardware torque for Grade 5 capscrews is listed here, and unless the manual says otherwise, that’s what you go by. I’ve seen guys snap bolts because they grabbed a random torque off the internet. Don’t be that guy. The factory spec is right there.

7 Filter Components Listed for Engine and Hydraulic Systems

The manual includes replacement filter charts for both the 1438 and 1448 models. For the 1438, you get the engine oil filter (P700002), in-line fuel filter (P700003), hydraulic screw-on filter (074830), reservoir sump strainer (128299), air cleaner dry element (P700004), and pre-cleaner ring (P700005). The 1448 chart lists the oil filter (P700113) and fuel filter (123828). Having these part numbers from the factory means you’re not cross-referencing a generic catalog and risking a clogged system.

Parts Identification: Numerical Index and Serial Number Location

The Table of Contents points you to component groups, and the Numerical Index helps you cross-reference part numbers. Serial numbers are stamped on the control panel housing and on the left top backwall plate. Right and left are determined from behind the screed facing the machine. If you order parts without matching the serial number, you’ll get the wrong stuff. I’ve seen it happen.

Why Choose an OEM Parts Catalog Over Aftermarket?

Aftermarket parts catalogs often reprint info from older editions, sometimes with typos in part numbers or missing torque specs. This is a factory GEHL print – Form No. 913209, Rev B. It supersedes 907875. The hardware list uses standard abbreviations (e.g., CS for capscrew, FLN for flanged flexlock nut). No guesswork about what fastener to use. The manual also states that grease fittings and common attaching hardware not illustrated are indented below the associated part in the list. That level of detail matters when you’re ordering a bolt for a screed assembly.

3 Reasons to Trust the Torque Data in This Catalog

First, it’s printed by GEHL, so the torque values match the original engineering specs. Second, the inside back cover provides standard torque for Grade 5 capscrews – and Grade 5 is what the factory calls out unless noted. Third, the manual explicitly says “unless otherwise specified, all capscrews are Grade 5, cadmium or zinc plated; hexagon nuts for Grade 5 capscrews and bolts are Grade A.” That eliminates any confusion about fastener grade and torque.

Frequently Asked Questions

Does this manual include repair procedures, or just parts?

This is a parts catalog. It does not contain step-by-step repair instructions. For that, you need the service manual.

What torque values are listed?

Standard hardware torque for Grade 5 capscrews and nuts is provided on the inside back cover. The manual also references specific torque for attaching hardware where applicable. If you need to know the torque for a particular bolt, check the parts list – it often notes mounting hardware which uses these standard values.

How do I find the correct part number for my machine?

Start by locating the serial number on the control panel housing or left top backwall plate. Then use the Table of Contents to find the component group (e.g., engine, hydraulic system). Within that section, locate the exploded diagram and cross-reference the part number in the list. The Numerical Index at the front can also help if you already have a part number but need to see where it fits. Always verify the serial number range – this catalog covers S/N 18100 and before. If your machine is newer, you need a different edition.

Can I use this catalog for the 1448 model with serial number after 18100?

No. This catalog specifically covers serial numbers 18100 and before. Machines after that have different part numbers and possibly different designs. Ordering parts without matching the serial number range will result in incorrect components.

Related Manuals

• GEHL 1448 2010 Parts Catalog
• GEHL 1438, 1448 Operators Manual – Factory Specs & Operation
• GEHL SL4640, SL4840, SL5640, SL6640 2005 Parts Catalog

If you’re also working on the engine and want to understand common diesel issues, check this Wikipedia article on diesel engines for background. For further reading on engine operation and maintenance, this Wikipedia article on diesel engine provides solid reference material.

Download the Factory Manual today from AutoRepairManuals and get the right parts the first time.