Kaiser S2 2007 Parts Catalog

You are in the middle of a job on a Kaiser S2 walking excavator. The swing drive seal blew, and you need the correct part number. A generic parts list pulled off some forum got you the wrong o-ring three times. That costs hours, not to mention the headache of returning parts. This Kaiser S2 2007 Parts Catalog stops that nonsense. It is the exact factory document used by Kaiser dealers to order components. 184 pages of exploded diagrams, part numbers, and ordering instructions. No guesswork.

The book is split into modules: boom, cylinder, cab, covering, engine, superstructure, chassis, accessories, and tire equipment. Each module is clearly labeled with a letter code (H for boom, J for cylinder, etc.). If you need a hydraulic cylinder seal kit, you go to module J and find the component group. The manual even tells you to reference the fabrication number from the operator’s manual (chapter E) when ordering. That level of detail is why I keep a paper copy on the bench next to my torque wrench. Digital PDF works too, but you need the real file, not a scan of a print.

Modules Covered: From Boom to Engine

The Table of Contents (page A-1) lists all modules: CYLINDER (J), BOOM (H), CAB (F), COVERING (G), ENGINE (I), SUPERSTRUCTURE (E), CHASSIS (D), ACCESSORIES (M), TIRE EQUIPMENT (K). Each module contains multiple sub-groups with part numbers, quantities, and illustrations. The layout is standardized – you can flip directly to the section you need without reading through generic instructions. For a machine as specialized as the S2, having the factory grouping saves time when you are standing in the mud trying to figure out why the track adjuster won’t hold.

184 Pages – What You Actually Get

The manual is 184 pages of concentrated parts data. That includes the full spare parts order form template (page A-2) and instructions in German, English, French, and Italian. Each page has a revision letter and effective date. This copy is valid from KB-2095 (production serial number) as of January 1, 2007. You get the exact list of components that Kaiser used when the S2 left the factory. No aftermarket condensing. No deletion of expensive little brackets. If you need the part, it is in here.

4 Reasons to Use OEM Parts Documentation

Aftermarket parts books often merge multiple model years into one diagram. The result: wrong part numbers for your specific serial number. Kaiser designed the S2 with a specific component set for each production range. This catalog lists parts by module and sub-group, referencing the official fabrication number. If you want to keep your machine running without cross-referencing eBay listings, use the OEM document. It also includes the manufacturer address and contact info for Kaiser AG in Schaanwald, Liechtenstein. You cannot get that from a pirated scan.

Does the Catalog Cover the Diesel Engine?

Yes. Module I (ENGINE) lists all engine-related spare parts. Note: this is a parts catalog, not a service manual. You will not find torque values or repair steps here. But if you need the injection pump gasket or the alternator mounting bracket, the part number is there. For the actual repair procedure, pair this with the Kaiser S2 service manual. That combination covers diagnostics, torque specs, and overhaul limits.

How to Order Spare Parts the Factory Way

Page 2 explains the ordering process. You need the fabrication number (from the operator’s manual chapter E) and the module letter (A for components). Then you quote the five-digit Bestellnummer: 2.000.285. Without these, the dealer will delay your order. I have seen guys order a whole cylinder assembly because they gave the wrong module code. This manual saves you from that. Write down the part number from the correct diagram, and you get the right part the first time.

Frequently Asked Questions

Can I use this catalog for a 2008 Kaiser S2?

Only if the serial number falls within the valid range (KB-2095 and later). The cover states validity from KB-2095 for 2007 production. Later revisions exist. Check the part number.

Are torque specs included?

No. This is a parts catalog. Torque tables are in the service manual. Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide is a different document.

If you own or maintain a Kaiser S2, this 184-page factory parts catalog is the only reliable way to identify and order OEM components. The drawings are crisp, the part numbers are factory-correct, and the ordering instructions prevent backorders. Stop losing billable hours on wrong parts. KAISER S3 Allroad Parts List July 2008 covers the S3 variant, and KAISER S1 Parts Catalog Spare Parts List handles the smaller chassis. For the S2, get this document on your hard drive or in the glovebox. Automotive Industry Overview and Automotive Industry Overview give context on equipment standardization, but for your S2, this catalog is the final word. Download the Factory Manual now and keep your walking excavator in the field instead of the shop.