Manitou MT 1435 SL, MT 1440 SL, MT 1435 SL Turbo, MT 1440 SL Turbo, MT 1440 SL Turbo Ultra 2005 Parts Catalog

I’ve been wrenching for 28 years, and I’ll tell you straight: ordering the wrong part on a telehandler will cost you a Saturday and a nice chunk of cash. This Manitou MT 1435 SL, MT 1440 SL, MT 1435 SL Turbo, MT 1440 SL Turbo, MT 1440 SL Turbo Ultra 2005 Parts Catalog is the factory document you need to get the right piece the first time. 194 pages of exploded diagrams and OEM part numbers. No aftermarket guesswork. No cross‑reference headaches. This is what the dealer uses.

Parts Ordering – Why the Figure Number Matters

Open the manual to the first few pages and you’ll see the ordering procedure spelled out in five languages. You need the catalog reference (547914 C), the figure number (like 6 BA 122), the part series, quantity, and the machine’s serial number. Miss one of those and the part that shows up won’t fit. I’ve seen guys try to order a hydraulic filter by model name only. That’s how you get the wrong thread pitch. This manual shows you exactly what to tell your dealer. Page 4 has the full example: catalog ref 547914, figure 6 BA 122, quantity 7, item 7. Follow that format and the part lands on your bench.

Models Covered: Five Variants, One Catalog

The catalog covers the MT 1435 SL Series 3‑E2, MT 1440 SL Series 3‑E2, MT 1435 SL Turbo Series 3‑E2, MT 1440 SL Turbo Series 3‑E2, and the MT 1440 SL Turbo Ultra Series 3‑E2. Each variant shares a lot of common chassis and drivetrain parts, but the turbo models have different engine components. The catalog groups them by figure numbers, so you’ll see a single illustration for a fuel injection pump with notes flagging which part applies to the Turbo Ultra. No need to flip between separate books. That’s how a factory parts catalog should work.

What the 194 Pages Cover

This is a parts catalog, not a repair manual. If you need torque specs or service procedures, grab the Manitou MT Series Technical Manual instead. Here you get exploded views of every major system: engine, transmission, axles, hydraulics, electrical, cab, and attachments. Each figure has a list with the part number, description, and quantity. For example, the hydraulic pump group shows the pump body, seal kit, and mounting bolts with separate part numbers. You can order exactly what you need without buying a whole assembly. The catalog also includes a numerical index at the back so you can look up a part number and find which figure it appears on. 194 pages, all factory data from 2005.

OEM Documentation vs. Third‑Party Reprints

I’ve had customers bring in aftermarket parts catalogs printed on cheap paper with blurry line drawings. The part numbers are sometimes wrong, or they skip a variant. This is the original Manitou publication – date code 06/2005, reference 547914 C. The drawings are sharp, the callouts are clear, and the part numbers come straight from the factory. You can compare it to the parts on your machine and know you’ve got the right reference. If you’re working on a Manitou telehandler, this is the only source I’d trust. Check this Wikipedia article on diesel engines if you want background on the Perkins or Yanmar engines used in these models, but for part numbers, stick with the factory book.

Who Needs This Parts Catalog

If you own one of these telehandlers and do your own maintenance, this catalog pays for itself the first time you order a water pump or a seal kit. The same goes if you run a small fleet – keep one in the shop and one in the office for parts ordering. For a home garage enthusiast who picked up a used MT 1435 SL Turbo, you’ll need the serial number to confirm which series you have. The catalog lists the Series 3‑E2, so if your machine is an earlier or later series, some figures won’t match. Check the data plate before you buy. The Manitou MT 1435 SL, MT 1440 SL, MT 1435 SL Turbo, MT 1440 SL Turbo, MT 1440 SL T related manual covers other series if yours is different.

3 Reasons to Choose the Factory Parts Catalog

First, every part number is verified by the manufacturer – no typos, no vendor substitutions. Second, you get the correct figure numbers and part positions so you can identify what you need without removing the old part. Third, the catalog includes supersession notes. Sometimes a part number changes. The factory catalog will list the old number and the new one in the same figure. That alone saves you from ordering an obsolete part. For a compact telehandler like the MT 1440 SL Turbo Ultra, these details matter.

FAQ

Does this parts catalog include repair procedures?

No. It is a parts identification document only. You need the service manual for torque specs and disassembly steps. The K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages is a similar parts book for a different model line.

Will it cover the MT 1435 SL Turbo from 2004?

This catalog is dated 06/2005 and covers Series 3‑E2. If your machine is an earlier production year, some parts may have different numbers. Check your serial number against the manual’s range.

How do I read the figure numbers?

Each figure has a code like “6 BA 122”. The first number (6) indicates the system group. The letters indicate the machine family. Use that figure number when ordering from your Manitou dealer. The example on page 4 of the catalog shows the exact format.

Is the catalog available in English?

Yes. The PDF includes English, French, German, Spanish, and Italian. All part numbers and descriptions are language-neutral. The ordering instructions appear in each language on separate pages.

If you’re tired of chasing wrong part numbers and want a binder that sits on your bench and earns its keep, this is it. 194 pages, factory data, and the same information your dealer pulls up. Download the Factory Manual and start ordering parts the way a pro does.