Massey Ferguson 8180 Parts Catalog – 544 Pages of Factory Specs

I’ve lost count of the hours I’ve burned chasing aftermarket parts catalogs that show the wrong part number for a Massey Ferguson 8180 Parts Catalog. You order the piston kit, get it in your hand, and the ring groove is off by a half-millimeter. That’s a wasted week. This is the factory Massey Ferguson 8180 Parts Catalog – 544 pages, straight from the OEM. No reprint, no guesswork. Every part number, every revision, every serial number split is documented like the engineers intended.

Engine Overhaul Coverage

The catalog opens with the Engine And Equipment section, starting at page 010-0005. That covers the Engine block, Cylinder block equipment, timing gear housing, flywheel housing, and the full rotating assembly. If you’re rebuilding the bottom end, you need the Crankshaft, pistons, and connecting rod section (010-0045). Every piston, ring, pin, rod bearing, and the Crankshaft itself is listed with its own part number. The Valve mechanism and Camshaft section (010-0050) gives you the exact valves, springs, keepers, and camshaft part numbers. That’s the difference between a leaky rebuild and one that seals.

Valve Mechanism And Camshaft: Factory Part Numbers

You wouldn’t believe how many aftermarket catalogs list a generic valve for the 8180’s Perkins engine. This catalog breaks it down by serial number range, with separate part numbers for intake and exhaust valves, valve guides, and seals. The Valve mechanism section includes the rocker arm assembly, pushrods, and the camshaft itself. If you need the camshaft thrust plate or the timing gear, the part number is right there. No calling the dealer to cross-reference.

How Do Serial Number Splits Affect Your Order?

Two sections in this catalog deal with the cooling system – one “Up to Serial or Engine Number H152021” and another “From Serial or Engine Number H152022”. That’s because Massey Ferguson updated the Sanden compressor mounting. If you order the wrong bracket or hose, you’re stuck. The catalog labels each assembly with its serial number range. Locate your tractor’s serial number (left side of the engine block or on the chassis tag) and match it to the correct part listing. This is where aftermarket catalogs fail – they ignore the splits.

3 Reasons to Choose OEM Parts Catalog Over Aftermarket

First, every part number is verified by the manufacturer. Second, the exploded diagrams show exactly how each piece fits, including fasteners and gaskets. Third, the catalog includes Engine repair kit numbers (010-0145) and gasket set numbers (010-0150) that bundle everything for a full overhaul. You won’t get that from a parts store’s computer screen. This is the same document the dealer uses.

Fuel System and Accessories

The catalog covers the full fuel system: injection pump (010-0095), injectors (010-0115), fuel filter (010-0120), and the fuel tank with attachments (010-0190). There’s even a section for the additional tank and brackets, split by serial number up to H091014 and from H091015. If you’re replacing a fuel line or the stop magnet, you need those sub-section numbers to order the right piece. The catalog also lists the Air Filter sections – thermostart equipment (010-0220) and dry dual element (010-0225) – so you can match the correct filter housing.

Source Validity: OEM vs. Aftermarket

This is a genuine Massey Ferguson Parts Catalog, not a third-party compilation. The document’s page headers, part number formatting, and serial number breakdowns match what you’d see on the factory floor. I’ve used aftermarket catalogs that listed a part that was superseded five years ago. This catalog shows the current part number with any supersession notes. That’s why I tell every tech: skip the aftermarket PDFs and go straight to the OEM. This is the standard across the Automotive Industry Overview – original documentation saves time and returns.

Does this catalog include torque specifications?

No. This is a parts catalog – it lists part numbers, quantities, and exploded views. Torque specs are in the factory service manual. If you need torque values, get the corresponding service manual.

How do I use the serial number ranges listed in the catalog?

The catalog uses breaks like “Up to Serial or Engine Number H152021” and “From H152022”. Find your tractor’s serial number – usually on a metal tag on the left side of the engine block, above the starter, or on the chassis frame near the cab. Compare that to the catalog’s listed ranges. For example, the Sanden compressor section has two variants. If your serial number is H152000, you order parts from the “Up to” section. If it’s H152030, use the “From” section. This step is mandatory to avoid ordering the wrong bracket, hose, or compressor mount. The same applies to the fuel tank brackets (sections 010-0200 and 010-0205) and the cooling system. I’ve seen guys skip this and end up with a bracket that doesn’t align. Don’t skip it.

If you’re working on a Massey Ferguson 8180 and you need the right parts without the back-and-forth, this is the tool. Download the Factory Manual from AutoRepairManuals and keep your rebuild moving.

Related Manuals

• Massey Ferguson 8180 Parts Catalog – Factory OEM 545-Page Manual
• Massey Ferguson 8180 Parts Catalog – Factory OEM Specs
• Massey-ferguson MF300 Parts Catalog – 607 Pages – Factory OEM

For more context on why OEM documentation matters, refer to the Automotive Industry Overview.