Massey Ferguson MF 30, MF 31XP, MF 32, MF 34, MF 36 Parts Catalog – Factory Parts Breakdown

If you’ve been burned by aftermarket part numbers that don’t match the hole in your block, you already know why this matters. I’ve had guys hand me a part that’s supposed to fit a Massey Ferguson MF 30, MF 31XP, MF 32, MF 34, or MF 36 combine engine, and the bushing is 0.5mm oversize. That’s a day wasted. This Parts Catalog is the real deal—factory-issued, 72 pages of exploded views and genuine Massey Ferguson part numbers. No reprints, no third-party scanning. You get the same book the dealer parts counter uses.

Engine 612DSIL: What This Parts Catalog Covers

Every page in this catalog is tied to the Valmet 612DSIL engine used in the MF 30 through MF 40 combine series. Page 2 shows the engine assembly itself, complete with serial number breakpoints (from Serial or Engine Number 50231). The catalog breaks down the cylinder block section starting on page 226 of the original document, listing every screw, bushing, liner, and bearing carrier by OEM part number. If you need a bearing carrier for the MF 31XP, the part number V836324757 is right there. No fluff, no interpretation—just the number and the quantity. That’s what I call documentation you can trust.

Cylinder Block Components and Part Numbers

Page 4 of the PDF dives into the cylinder block – engine 612DSIL from D 8595. You get part numbers for cylinder block V836347916, bushings V835346889, liners with thickness variations (STANDARD, 9.08MM, 9.13MM, 9.23MM), and even the parts pack V835336463 for a diameter +61MM. I don’t trust aftermarket catalogs that list “bushing set” without telling you which variant. Here, you see it: thickness 9.08MM versus 9.13MM—pick the right one based on your block’s bore. That level of detail saves a trip to the dealer and a restocking fee.

7 Systems Covered in 72 Pages

This isn’t a repair manual—it’s a parts identification book. But without it, you’re guessing on every bolt. The catalog covers the entire engine: cylinder head, valves, timing gears, oil pan, fuel injection pump, turbocharger, and the cooling system. Each system has its own section with exploded diagrams. You see the item number, the part number, the quantity per machine, and a description. For the MF 36, the oil cooler gasket part number is listed alongside the MF 34 version. Cross-referencing is built in. It’s a 72-page shortcut to getting the right box off the shelf.

Why You Need OEM Part Numbers for Combine Engines

Aftermarket catalogs often “update” part numbers without telling you. Then you order a liner for your MF 30, and it’s the wrong diameter. This manual comes straight from Massey Ferguson’s own parts system—Valmet 1637219. The part numbers match the factory bins. I’ve seen too many DIY guys buy a “compatible” bearing set and then have the crank seize because the clearance was off. With this catalog, you order V836338601 (valve) instead of a generic “valve set.” It’s your insurance against a $4000 engine rebuild mistake.

Get the Right Part, Not a Guess – Use the Exploded Views

The catalog uses exploded diagrams with item numbers that tie directly to the parts list. For example, on the cylinder block page, item 14 lists liners: part numbers 3637621M1 (standard) and V836338436 (9.08mm). The diagram shows exactly where each liner goes and which bushings (item 2, 3, 4) fit into the block. If you’ve ever tried to reassemble a combine engine from memory, you know the value of a drawing that shows the oil seal orientation. This catalog gives you that.

About This Manual – Source Authenticity

This is a direct OEM scan from the Massey Ferguson factory parts system. The file name itself confirms it: MASSEYFERGUSON_MF_30-MF_31XP-MF_32-MF_34-MF_36_Parts_Catalog_en-39714020087.pdf. It’s 72 pages of genuine part numbers, not a generic compilation. There are no watermarks from aftermarket sellers, no missing pages from photocopying. You get the same data a dealer would pull up on their system. For more Massey Ferguson combine engine documentation, check out the Massey Ferguson Combine Engines Parts Catalog MF 30-40 and the Massey Ferguson MF 30/31XP/32/34/36/38/40 Valmet Engine Parts. Also see the Massey-Ferguson MF300 Tractor Loader Dozer Parts Book for related models.

For broader context, the Automotive Industry Overview shows why OEM documentation matters Automotive Industry Overview.

Frequently Asked Questions

Does this parts catalog cover the Valmet engine used in MF 38 and MF 40?

Yes. The cover page lists MF 30 through MF 40 combine engines. Inside, the engine assembly section includes both the MF 38/265CH and MF 40/290CH variants with the same 612DSIL block. The catalog cross-references serial numbers for each model.

Can I use this catalog to order parts for an MF 31XP?

Yes. The MF 31XP is listed on every page header. The cylinder block section includes part numbers specific to the 31XP.

Are torque specifications included in this parts catalog?

No. This is a parts catalog, not a service manual. It lists part numbers, quantities, and exploded views. For torque specs you need a separate Massey Ferguson shop manual. That said, the catalog will tell you which bolt part number to buy for the cylinder head—your torque wrench and the shop manual handle the rest.

How many pages are in this catalog and what format is it?

72 pages in PDF format. The pages are scanned from the original factory manual so you see the same layout as the printed edition. Page numbers in the PDF match the original document’s pagination (e.g., page 226 for the cylinder block).

Stop guessing on part numbers and wasting time on returns. Download the Factory Manual and get the exact Massey Ferguson part numbers for your MF 30, MF 31XP, MF 32, MF 34, or MF 36 combine engine. One click, and you’ve got 72 pages of factory data on your screen.