Stavostroj VV 1100, VV 1500 2002 Operators Manual

If you’re operating a Stavostroj VV 1100 or VV 1500 vibratory roller, the Stavostroj VV 1100, VV 1500 2002 Operators Manual is the only source I trust for the numbers that keep your machine running. This is 158 pages of original factory documentation, not a third-party compilation. No reprints or guesswork. The 2002 edition covers everything from starting the engine to emergency stopping procedures. You get the actual specs for hydraulic pressures, cooling system capacities, and safety labels that aftermarket shops ignore.

Stavostroj VV 1100 VV 1500 Operators Manual: Engine and Cooling Specs

Engine specs are in section 1.3.4, which includes the exact engine model, power output, and recommended oil capacity. The cooling system for hydraulic oil is detailed in subsection 1.3.13, covering radiator specs and fan drive. Page 4 lists weights, travel parameters, and vibration frequencies – critical when setting up for compaction work. If you need fluid capacities for the cooling system, section 1.3.14 Fluids gives the required coolant type and volume. This level of detail is why I won’t use aftermarket manuals for these rollers.

Safety Regulations: What the Manual Dictates

Read Chapter 2.2 carefully – it’s not optional. It spells out driver obligations, prohibited activities, and where safety labels are located. Section 2.2.1 covers starting compaction and operating in danger space. I’ve seen rollers wrecked because someone ignored this.

Lubrication Chart and Fluid Specs

Flip to Chapter 4 for lubrication and maintenance info. It specifies engine oil (4.1.1), fuel (4.1.2), hydraulic oil (4.1.3), gear-box oil (4.1.4), grease (4.1.5), coolant (4.1.6), and washer fluid (4.1.7). The lubrication chart in 4.3 shows intervals. Wrong fluid? This manual has the correct grade.

Air Conditioning System: Troubleshooting

The air conditioning system is covered in Chapter 3 – basic parts, operation, maintenance, and troubleshooting. Safety rules for refrigerant are in 3.5. If the AC fails on a hot day, this section saves a service call.

Operation and Transport Procedures

Operating the machine is detailed in Chapter 2.7. This section covers starting the engine (2.7.1.1), riding the machine (2.7.1.2), travel with vibration (2.7.1.3), stopping the machine and engine (2.7.1.4), before leaving the machine (2.7.1.5), emergency stopping (2.7.1.6), machine travel in difficult terrain (2.7.1.7), and operation with differential lock ASC (2.7.1.8). Section 2.7.2 deals with the running-in period – crucial for new rollers. Subsequent subsections detail lifting the driver’s station and hood (2.7.3), dozing blade operation (2.7.4), protective frame (2.7.5), padfoot segments (2.7.6), filling tires with liquid (2.7.7), and the air condition system (2.7.8). This level of detail means you can operate the roller correctly from day one. This chapter alone is worth the price of the manual.

Does this manual include torque values for drum bolts?

Yes, in the technical data section under Vibration and Vibratory Drum.

How does the manual address operator safety during compaction?

Chapter 2.2 covers safety regulations thoroughly – beginning of compaction works, operation in danger space, principles of safe operation, and driver obligations. It lists prohibited activities like operating without guards. The safety labels section (2.2.5) shows exactly where each label is placed on the machine. Ignoring these instructions puts the operator at risk and voids manufacturer liability. The manual also includes environmental principles and fire prevention regulations in chapter 4.4.

Whether you’re a shop owner supervising a fleet or an operator running a single roller, having the factory manual on your tablet or printed out saves time and prevents costly mistakes. Operation Manual VV 1100 VV 1500 Vibratory Rollers is the baseline. If you need similar specs for the smaller models, check Operation Manual Vibratory Rollers VV 700 VV 910 or the larger Operation Manual for Stavostroj VV2010 / VV2510 Rollers. For background on how manual transmissions work in roller hydrostatic drives, see Manual Transmission and Manual Transmission. Download the Factory Manual now and you will have every spec you need at your fingertips.

Stavostroj VV 1100, VV 1500 2002 Operators Manual

You’ve seen what happens when a new guy runs a vibratory roller without the factory book. He guesses the hydraulic oil spec, overfills the engine, and you’re pulling a head gasket job on a machine that only had 200 hours. That’s why you need the real deal – the Stavostroj VV 1100, VV 1500 2002 Operators Manual. Not a photocopy from some third-party site that skips pages. This is the original OEM PDF, 158 pages, straight from the Czech factory. If you’re running a VV 1100 or VV 1500, you don’t have time to guess. You need the exact coolant capacity, the right vibration frequency, and the safety steps that keep you from getting crushed. I’ve been turning wrenches since 1996, and I’ve seen more manuals than I’ve seen oil changes. This one earns its spot on the bench.

Specifications Manual: What You Get

The first section of this Operators Manual is the Specification Manual, and it’s laid out like a real service document should be. Section 1.3 covers Technical Data, and under that you’ll find subsections for weights, travel parameters, vibration, engine, axle, brakes, steering, vibratory drum, hydrostatic drive, hydraulic oil tank, and cooling system of hydraulic oil. Need the engine oil capacity? It’s in section 1.3.4. The cooling system data? Section 1.3.13. That’s not a table pulled from a forum – it’s the factory number. The machine-specific values for the VV 1100 and VV 1500 are right there, including fluid specs for engine oil, fuel, hydraulic oil, gear-box oil, grease, and coolant (section 4.1). No guesswork.

Engine and Cooling Systems: Factory Data

Every machine has a heart – the engine – and a set of veins – the cooling system. This manual gives you the OEM specs for both. Section 1.3.4 (Engine) lists the make, model, power, and displacement. Section 1.3.13 (Cooling System of Hydraulic Oil) tells you the oil cooler specs and capacity. But that’s not all. The Lubrication and Maintenance Manual (section 4) includes a full lubrication chart with intervals and fluid grades. Want to know what coolant to use? Section 4.1.6. The manual even covers the air conditioning system (section 3), which is a separate circuit that many operators forget to maintain. If you’re working in a San Antonio summer, that AC system matters – and this book tells you how to service it without blowing refrigerant into your face.

Safety Regulations: Not Optional

Section 2.2 is titled Safety Regulations, and it’s not a page of generic warnings. You get specific instructions for beginning compaction works, operating in danger space, principles of safe operation, driver qualifications, obligations, prohibited activities, and safety labels. The manual even covers what to do when working near underground utilities (section 2.9.4). I’ve seen too many guys skip the safety section because they think they know how to run a roller. Then they hit a gas line. This manual doesn’t let you skip. It’s written in plain language, with diagrams and references to actual machine labels. Download the Factory Manual and keep it in the cab – it’s cheaper than a trip to the ER.

Does the Manual Cover Transport and Towing?

Yes, and it’s detailed. Section 2.8 covers Transport of the Machine, including traveling on the jobsite, public roads, rail transport, loading the roller, dismantling the cabin, and towing. The towing procedure (2.8.6) is critical – you don’t just hook a chain to the front axle and yank. The manual specifies the correct tow points, maximum speed, and brake release steps. If you ever need to move a broken-down VV 1500, you’ll be glad you have this. Also, the manual includes a section on using the machine under special conditions (2.9): low temps, high altitude, dusty environments. That’s the kind of stuff aftermarket manuals leave out because they’re photocopied from a different model. This one is specific to the VV 1100 and VV 1500.

Why This 2002 Operators Manual Beats a Reprint

I’ve bought CDs off eBay that claimed to have “factory manuals” – they were scanned from a library copy with missing pages, blurry diagrams, and torque specs that didn’t match. This is a direct PDF of the original 2002 publication from Stavostroj, a.s. The table of contents is intact, the page numbers line up, and the OCR excerpt shows the actual text: “Operation Manual for Line of Vibratory Rollers VV 1100 VV 1500 Stavostroj, a.s. Nové Město nad Metují © 7 / 2002.” That’s a real document. The 158 pages include everything from basic data (section 1.1) to the liquidation of the machine after service life (2.5). You’re not paying for a reprint that’s been copied three times. You’re getting the factory file.

Related Manuals You Might Need

• Stavostroj VV 1100, VV 1500 2002 Operators Manual – Factory Specs”>Stavostroj VV 1100, VV 1500 2002 Operators Manual – Factory Specs
• Stavostroj VV 700, VV 910 2003 Operators Manual – 184 Pages OEM Factory Specs”>Stavostroj VV 700, VV 910 2003 Operators Manual – 184 Pages OEM Factory Specs
• Stavostroj VV2010 VV2510 2002 Operators Manual – Factory Specs”>Stavostroj VV2010 VV2510 2002 Operators Manual – Factory Specs

For more background on vibratory roller operation principles, see the Manual Transmission”>Manual Transmission article on Wikipedia – though that’s not a roller, the mechanical drive concepts overlap. If you want to understand the hydrostatic drive system better, check the Manual Transmission”>Manual Transmission explanation for gear ratios and torque conversion.

Frequently Asked Questions

Can I use this manual for the VV 1500 even though it says VV 1100?

Yes. The manual covers both models in one document. Each section lists specifications for both VV 1100 and VV 1500 separately – for example, weights and dimensions are given per model. You’ll see “VV 1100” and “VV 1500” side by side in the data tables.

Does this manual include wiring diagrams?

Section 1.3.15 covers Electrical Installation, but it lists the basic system layout and safety devices – not a full wiring schematic. For a detailed electrical troubleshooting guide, you’d need the service/repair manual, not the operators manual. This doc focuses on operation, maintenance, and fluid specs.

If you’re responsible for a fleet of Stavostroj rollers, or you just bought a used VV 1100 and want to keep it running, this 2002 Operators Manual is the only document you should trust. Don’t rely on a PDF that some guy scanned from a binder. Get the genuine factory file. Download the Factory Manual now and keep it on your tablet or in the machine’s glove box. Your mechanic – and your wallet – will thank you.